How To Lay Wooden Floor?

Lay Wooden Floor

Did you know that you can lay wooden flooring in your house by yourself? Yes, you can lay a wooden floor in your home. Not only can you enjoy doing this yourself, but you can also be happier with your own-made flooring.

Wood demonstrates great versatility when used for flooring. It makes an excellent sub-floor on which to lay other floor coverings, and it can be laid in a number of different ways to produce an attractive finish in its own right.

How To Lay Wooden Floor

Lay Wooden Floor: Renovating Old Floors

Laying a new wooden floor can sometimes be avoided by renovating an existing one and giving it a decorative finish. There are obvious financial advantages to this approach as the raw material is already there, and a relatively simple process is all that is required to finish it.

Lay Wooden Floor: Considering the Amount of Use

If a floor needs a lot of repairs or board replacement, decide whether or not the renovation is worthwhile. This will depend on how much you use the room.

Lay Wooden Floor: Covering a Floor

If you are covering a floor with rugs so that only a small part is visible, the wooden surface will not be a prominent feature and need not be highly finished.

Lay Wooden Floor: Assessing the Job

When planning floor renovation, assess the work required to finish it. A rustic, distressed look will take far less work than a highly polished finish.

Using Stripper

You can plan this process according to the size of the floor. Use a chemical stripper on a small floor or when only a small proportion of a floor requires stripping. A chemical stripper is not economical when used for large areas.

Laying Wooden Floor: Masking

To prevent the stripping solution from reaching the painted surface of the baseboard, use at least 2 inches (5 cm) of masking tape along its lower edge.

Applying and Removing

Apply the stripper with an old paintbrush in 3-square-foot (0.25 square meter) sections. Once it reacts, scrape away the paint or varnish with a broad-bladed scraper. Use a wire brush for uneven floors.

Laying Wooden Floor: Sanding Efficiently

Do not forget to protect yourself during wood floor installation. Always wear goggles and a mask to guard against flying particles and dust inhalation.

Removing Protrusions

Use a hammer and nail punch to drive in protruding nails. Otherwise, the sandpaper will tear, and there is a risk of damaging the sander.

Dealing with Edges

Since most industrial sanders cannot reach the edges of a floor, use a hand-held electric sander to finish.

Reaching Corners

Wrap sandpaper around the end of a screwdriver to get right into the corners. This technique will create a neat, square finish.

Tip: Click on the “tags” below for more information on “Laying Wooden Floor”.