advertisement

How To Make Kitchen Stuff at Home

How To Make Kitchen Stuff at Home

How To Make Kitchen Stuff at Home? Red may be the colour of danger – but here it will keep everything in the kitchen safe Protect your hands from heat with the oven glove or mitts and keep the dust off your tray with this tray cloth.

Size: The oven glove will fit any size hand; the oven mitts are 18 x 80cm (7 1/4 x 32in) and the tray cloth is 33 x 43cm (13 1/4 X 17 1/4 in).

advertisement

You Will Need

Oven glove

  • 35 X 50cm (14 x 20in) wide striped quilted fabric for outer section
  • 35 x 50cm (14 x 20in) lining fabric
  • 35 x 50cm (14 x 20in) thick wadding (batting)
  • Oddment of narrow striped fabric for binding

Matching thread Oven mitts

  • 18 x 80cm (7 1/4 X 32in) wide striped quilted fabric for outer section
  • Two 18cm (7 1/4in) squares thick wadding (batting)
  • 18 x 80cm (7 1/4in x 32in) narrow striped fabric for lining
  • Two pieces 18 x 20cm (7 1/4 x 8in) narrow striped fabric for end sections
  • Oddment of narrow striped fabric for binding.

Matching thread Tray cloth

  • 35 x 45cm (14 x 18in) wide striped fabric
  • 7 X 160cm (2 1/4 X 64in) variegated striped fabric
advertisement

Matching thread

Oven Mitts

Oven Glove

  • Make your pattern and com­plete the oven glove following the instructions given on page 64. The oven glove was bound using 4cm (1 1/2 in) wide bias strips of the narrow striped fabric, forming a finished binding width of 1cm (3/8 in). You will need to cut and join the strips to form one length of about 130cm (52in).

Oven Mitts

  • Make your oven mitts follow­ing the instructions given on page 65. The end sections of these mitts are a single layer of fabric – instead of binding the opening edge, fold 2cm (3/4 in) to the wrong side, turn under the raw edge and stitch in place. The mitts were bound using 4cm (1 1/2 in) wide bias strips of the narrow striped fabric, forming a finished binding width of 1cm (3/8 in). You will need to cut and join strips to form one length of approximately 2m (2 1/4 yd).
  • Cut the strip of variegated striped fabric into four pieces – two 35cm (14in) long and two 45cm (18in) long. Press 1cm (3/8 in) to the wrong side along one long edge of each strip.
  • Lay two strips of different lengths together with their ends and pressed edges matching and right sides facing. Starting at one corner point away from the pressed edges, stitch diagonally across the end. Trim away the excess triangle of fabric and press the seam open to form a mitred comer. Repeat to make the other three mitred corners.
  • Lay the right side of the mitred corner sections against the wrong side of the large rectangle and stitch together along all four edges. Trim away the corners. Fold the mitred sections over to the right side. Press, placing the seams along the pressed edges. Stitch the inner pressed edges of the mitred section in place.
Look at the other similar posts:

Tags: , , , ,

Category: Do It Yourself

Share This Page With Your Friends, Easily:

banner